Name: Data Collection and Transmission Solution for French Linky Smart Meters
Rating: 5 (99 reviews)

Data Collection and Transmission Solution for French Linky Smart Meters

View Products Contact Us

Compatible with French Linky Meters, Supporting Both Historical Mode and Standard Mode
Self-powered Design (Supplied from the Meter Through Terminals I1 and A)
Sub-1G Wireless Communication with Strong Penetration and Long Transmission Distance
Built-in RS485 Interface Supporting Modbus RTU
Conformal Coating on Key Components for Use in a Wide Range of Environments
Supports OTA Remote Upgrade
Bridge Downlink Communication: Sub-1G (Built-in Antenna)
Bridge Uplink Communication: Wi-Fi (Built-in Antenna, 2.4G)
External Interfaces: Supports HTTP / MQTT / Modbus TCP (Bridge)

TIC Meter is a data collection and transmission solution designed for French Linky smart meters. The product consists of two parts, the ES-TIC (TIC Collector) and the SEM-BG1 (Bridge) . It meets the need of photovoltaic systems, energy storage systems, EV chargers and Energy Management Systems (EMS) to access meter data, transmitting the real-time data of the TIC interface of the Linky meter stably and securely to the SEM-BG1 (Bridge) over Sub-1G wireless communication, and then uploading it to the cloud or a local platform system through Wi-Fi.

The ES-TIC (TIC Collector) is mounted directly on the Linky meter and is connected to the TIC interface of the meter through three terminals: I1 (common), I2 (data) and A (supply), so that it draws its own power and collects data. The SEM-BG1 (Bridge) adopts the appearance of an European-standard smart socket and is plugged directly into a 230V AC mains socket. With built-in Sub-1G and Wi-Fi antennas, it transfers the data onwards.

ES-TIC (TIC Collector)
Dimensions (L x W x H)	67.3 x 31 x 39.5mm (Including Pin Length)
Net Weight	≈30g
Power Supply	Self-powered from the Linky Meter (terminals I1, A)
Operating Temperature	-25°C ~ +70°C
Storage Temperature	-40°C ~ +80°C
Ingress Protection (IEC 60529)	IP20 (Whole Unit)
Enclosure Material	Flame-retardant ABS+PC
Interface Type	I1 (Common), I2 (Data), A (Supply)
Antenna Connector	One External Sub-1G Antenna Connector
RS485 Interface	One
Interface	RS485
Protocol	Modbus-RTU
Communication Address	1 ~ 247
Transmission Mode	Half-duplex
Transmission Distance	Max. 1000m
Transmission Speed	4800/9600 (default)/19200/38400/115200bps
Parity	NONE (default)/ODD/EVEN
Stop Bit	1/2
Response Time	<100 ms

SEM-BG1 (Bridge)
Dimensions (L x W x H)	50.4 x 49.7 x 82mm
Net Weight	≈70g
Power Supply	230V AC ±20%
Frequency	50/60Hz
Power Consumption	≤ 2W
Operating Temperature	-25°C ~ +70°C
Storage Temperature	-40°C ~ +80°C
Ingress Protection (IEC 60529)	IP20 (Whole Unit)
Enclosure Material	Flame-retardant ABS+PC
Interface	Sub-1G
Downlink Communication	Sub-1G (Built-in Antenna)
Uplink Communication	Wi-Fi (Built-in Antenna)
Wi-Fi Communication Distance	≤30m (Open Area)
Sub-1G Communication Distance (Open Area)	≤500m in Open Area; up to 4 Floors Vertically
External Interface Protocols	HTTP / MQTT / Modbus TCP (Function Codes 03/04/16 Supported)
Provisioning Method	AP Provisioning, Bluetooth Provisioning
General
Indicator	TIC: One Dual-color (Blue/Green); Bridge: One Dual-color (Blue/Red)
Button	One Function Button Each
Protective Treatment	Conformal Coating on Key Components
Certification	CE (RED/EMC/LVD), RoHS, Linky Ready

Web Menu

Product Search

Language

Exit Menu