Need Help? - Call: 0086-573-8369881/8369882 or email: sales@eastrongroup.com

中文版English

  • SDM630-Pulse V2 100A 3P3W/3P4W/1P2W Mutlifunction Power Analyser with Pulse Outputs

    • Measures kWh Kvarh, KW, Kvar, KVA, P,
    • F, PF, Hz, dmd, V, A, etc.
    • Bi-directional measurement IMP & EXP
    • Two pulse outputs
    • Din rail Mounted
    • 100A direct connection
    • Class 1.0 accuracy
    • 72mm  4 modual width
    • Description
    • Diagram
    • Manual Download
     Introduction
    The SDM630-Pulse V2 measures and displays the characteristics of single phase two wires (1p2w), three phase three wires (3p3w,) and three phase four wires(3p4w) supplies, including voltage, frequency, current, power ,active and reactive energy, imported or exported. Energy is measured in terms of kWh, kVArh. Maximum demand current can be measured over preset periods of up to 60 minutes. In order to measure energy, the unit requires voltage and current inputs in addition to the supply required to power the product.
    SDM630-Pulse V2 supports max. 100A direct connection, saves the cost and avoid the trouble to connect external CTs, giving the unit a cost-effective and easy operation.Configuration is password protected.

     Unit Characteristics
    The Unit can measure and display:
    Line voltage and THD% (total harmonic distortion) of all phases
    Line Frequency
    Currents, Current demands and current THD% of all phases
    Power, maximum power demand and power factor
    Active energy imported and exported
    Reactive energy imported and exported

    The unit has password-protected set-up screens for:
    Changing password
    Supply system selection 1p2w, 3p3w,3p4w
    Demand Interval Time(DIT)
    Reset for demand measurements
    Pulse output duration

     Pulse output
    This provides two pulse outputs that clock up measured active and reactive energy. The constant of pulse output 2 for active energy is 400imp/kWh (unconfigurable), its width is fixed at 100ms.
    The default constant of configurable pulse output 1 is 400imp/kWh, default pulse width is
    100ms.The configurable pulse output 1 can be set from the set-up menu.