Need Help? - Call: 0086-573-83698881/883698882 or email: sales@eastrongroup.com

中文版English

  • Multi Click Solution for Multi-circuits Loads Measurement and Monitoring

    • One centralised display for multiple circuits
    • Max of 32 x Three phase / 96 x Single phase networks
    • Plug in solution using RJ45 connectors for interconnection of modules
    • RJ12 connection for current transformers (100mV)
    • No voltage auxiliary supply required on current sensing modules
    • Space and labour saving as well as limiting potential wiring errors
    • Class 0.5S accuracy (IEC62053-22)
    • Description
    • Diagram
    • Manual Download


    A new range of Panel Mount and DIN rail metering modules that have been developed to save on labour costs and to eliminate wiring errors on installations.

    Multi-Click is an intelligent measuring and monitoring solution for power management and distribution. It has been designed and engineered to accomidate new and existing installations. This solution offers centralized measurement data on one display. As the current (A) measurement device ( MSC-I) is a 1 module DIN rail mounted enclosure, it reduces the space typically used in a traditional board or panel. The system uses pluggable input and output RJ45 connectors which enables flexibility as well as speed of installation, reducing the labor cost dramatically.

    It is a modular based system where you can have up to 32 x 3 phase current circuits and 96 x 1 phase current circuit to be measured and monitored. The entire system shares one voltage reference and one common display module. No auxiliary power supply is required. Using the MSC-D display you are able to detect and set the address of all slave devices that are connected on the MCS-BUS automaticaly. It will show the quantitiy of the devices found and any conflicting addresses. You can then automaticly assign new addresses to any conflicted devices on the MCS-BUS.

    If the current transfromer is installed in the incorrect phase sequence, it is not necessary to disconnect the current transformer and reinstall. The system will automatically correct the phase sequence connection by programme and the measurement and accurancy will not be influenced.



    ------------------------------------------------------------------------------------------------------------------------------------------------------------


    ------------------------------------------------------------------------------------------------------------------------------------------------------------

    ------------------------------------------------------------------------------------------------------------------------------------------------------------


    ------------------------------------------------------------------------------------------------------------------------------------------------------------



    Previous: None

    Next: None